GRU
Specifications
Single or two operator machine for higher production
MODEL: AMS-12P.S, AMS-24P.S
*Above Specifications could be changed without notice
ROTARY STEAM SETTER
Inner sketch
Single or two operator machine for higher production
MODEL: AMSL-12P (24P)
LEGGINGS & UNDERWEAR ROTARY STEAM SETTER
Specifications
1. The forms can be narrow down and expending of the forms width bt control device in machine.
2. When the forms for under wear of leggings settings, forms´s width narrow down for easy to put in and expending the widh size returns to origin size after put into the forms.
3. When the stripping them forms´ narrow down again to easy stripping.
1. Designed for 1 persons operating and manufacturing this machine which can board extra-large underwear, & leggings & tights by freely changing boarding forms.
2. Steam boarding chamber with a minimum capacity (removing unnecessary space) will ensure highly efficient work ability and mini size the steam consumption.
3. Adjustable according to request pressure and temperature to achieve high quality boarding results.
4. Through touching screen to easily operate & adjust this machine and trouble-shoot malfunctions.
Characteristics
Inner sketch
Single or two operator machine for higher production
MODEL: AMS-24P AMS-48P AMS-72P
ROTARY STEAM SETTER SOCKS & UNDERWEAR & PANTY HOSE & TIGHTS
Specifications
1) Designed for 1 or 2 persons (family memebers) operating and manufacturing this machine which can board extra-large underwear, socks, stockings, and panty-horse by freely changing boarding forms.
2) Steam boarding chamber with a minimun capacity (removing unnecessary space) will ensure highly efficient workability and minimize the steam concumption.
3) Adjustable according to request pressure and temperature to achieve high quality boarding results.
4) Through touching screen to easily operate & adjust this machine and trouble-shoot malfunctions.
5) Thickness (1.5mm, 2mm, 3mm, 4mm) of boarding forms can be replaced an used freely.
Inner sketch
*Above Specifications could be changed without notice
*Note: The actual product production volume will vary with the settung pressure.
*Capacity/output: 10hr
MODEL: AMSL-120 & 180
UNDERWEAR STEAM BOARDING MACHINE
Specifications
Inner sketch
MODEL: AMEU-R12 (ROTATE TYPE)
UNDERWEAR MOLD FOR SPINNING STEAM(SMEI) + ELECTRICAL SETTING MACHINE
Specifications
Inner sketch
Complete fiber shoes, setting machine
MODEL: AMS-S 500 Type-Series (For mass production ) / AMS-R144 Type-Series (A small amount production)
ROTARY SHOES STEAM SETTING MACHINE
Specifications
Inner sketch
1. Model new, single piece shoes and place them in a conveyor, automatically move the setting in which a single piece of material is completed in the shape of a shoe after passing through the pre-temperature pressure chamber, dry room, and cooling room
2. The six of the machine depends on the production volume.
Maximizing productivity two to five times faster machine capacity than man
SOCKS INSERT BOARD PAPER MACHINE
*It is possible to change the standard according to the size of socks, so it is highly applicable to socks (for children, ladies, men´s stockings)
AMS8G-S (96PCS/112PCS/128PCS/160PCS)
MODEL: 12Px8G (96PCS) / 14Px8G (112PCS) / 16Px8G (128PCS) / 20Px8G (160PCS)
ROTARY STEAM SETTER
Specifications
1. The AMS8G-S series is a machine that can be used in a small space and is a variety of mash-type small socks steam machines.
2. The 96P is a machine produced by customer demand with the principle of complete automation in automatic devices.
3. The 112 PCS is a machine that can automatically steal socks on demand from customers.
4. The 128-PCS and 160-PCS are machines that can mass-produce thin and short socks in a small space.
5. Aluminum with high thermal conductivity was used on the outer surface of the pipe pipe to maximize efficient for fast drying in a narrow space.
6. By minimizing the space in the steam pressure chamber, the space was reduced so that it could be shaped using an electric boiler or other small boiler.
We reduced heat loss to steam by reducing unnecessary space as much as possible.
7. Stainless materials, not aluminum molds, have been used to increase the duration of mold use by more that 10 times.
Inner sketch
*NOTE: The above are mechanical arithmetic representactions. There are changes depending on the shape of socks, the ability of functional weaving, and the saturation of water vapor.
AMS8G-M (192PCS/224PCS/256PCS/320PCS)
MODEL: 24Px8G (192PCS) / 28Px8G (224PCS) / 32Px8G (256PCS) / 40Px8G (320PCS)
ROTARY STEAM SETTER
Specifications
1. The AMS8G-M series is a facility that can be used in a small space and is a variety of medium-sized sock steam moulders.
2. 192PCS is a facility produced by customer demand with the principle of complete automation in automatic devices.
3. 224P is a facility that can be automatically deodorized according to the customer´s request.
4. the 256-PCS and the 320-PCS are capable of mass production of thin ans short socks in a small space.
5. Aluminum with high thermal conductivity was used on the outer surface of the pipe pipe to maximize efficiency for fast drying in a narrow space.
6. By minimizing the space in the steam pressure chamber, the space was reduced so that it could be shaped using an electric boiler or other small boiler.
7. We reduced heat loss to steam by reducing unnecessary space as much as possible.
8. Stainless materials, not aluminum molds, hace been used to increase the duration of mold use by more than 10 times.
Inner sketch
*NOTE: The above are mechanical arithmetic representations. There are changes depending on the shape of socks, the ability of functional weaving, and the saturacion of the water vapor.
AMS8G-L (240PCS/280PCS/320PCS/416PCS)
MODEL: 30Px8G (240PCS) / 35Px8G (280PCS) / 40Px8G (320PCS) / 50Px8G (400PCS)
ROTARY STEAM SETTER
Specifications
1. The AMS8G-L series is a variety of large horse-shaped socks steam machines that can be used in a small space.
2. The 240 PCS is a steam facility produced by customer demand with the principle pf complete automation in automatic devices.
3. 280 PCS is a facility that can be automatically deodorized at the request of customers.
4. The 320-PCS and the 416-PCS are steam installations that can be used to shape thin and short socks in large quantities.
5. It is a facility that can be produced in large quantities by minimizing steam pressure space and minimizing work space.
6. Aluminum with high thermal conductivity was used on the outer surface of the pipe pipe to maximize efficiency for fast drying in a narrow space.
7. By minimizing the space in the steam pressure chamber, the space was reduced so that it could be shaped using an electric boiler or other small boiler.
8. We reduced heat loss to steam by reducing unnecessary space as much as possible.
9. Stainless materials, not aluminum molds, have been used to increase the duration of mold use bY more than 10 times.
